English
Français
Deutsch
Português
Español
русский 
한국어
العربية
Italiano
Indonesia
Schweiz
Polski
Nederlands
ישראל - עברית
Perzisch
ไทย
日本語
ኢትዮ-አማርኛ
Việt Nam
Kiswahili
Srpski
Ελληνικά
繁體中文Product
- ebmpapst
- ZIEHL-ABEGG
- DELTA
- SUNON
- Rosenberg
- SODECA
- FULLTECH
- Nicotra Gebhardt
- S&P
- Wistro
- San Ace
- SANMU
- ADDA
- NMB-MAT
- WEIGUANG
-
HVAC Controls & Components
-
Sanhua
4 Way Reversing Vavle Electronic Expansion Valve Driver Electronic Expansion Valve Electronic Shut-off Valve Ball Valve Electronic Expansion Valve Controller Refrigerated Cabinet Controller Pressure Transducer Solenoid Valve Thermostatic Expansion Valve Pressure Control Check Valve Sight Glass Pressure Regulator Liquid Injector Brass Service Valve Charge Valve Filter Drier Drain Pump Accumulator Liquid Receiver Oil Separator
-
Fengshen
Pressure Control Differential Pressure Control Temperature Control Flow Switch Pressure Controlled Water Valve Evaporation Pressure Regulating Valve Temperature Controlled Water Valve Solenoid Valve Thermostatic Expansion Valve Temperature Responsive Expansion Valve Constant Pressure Expansion Valve (Hot Gas Bypass) Pilot and Main Valve Forerunner Pressure Regulating Valve Sight Glass
- Magic
- Sonyo
- CAREL
- Tecumseh
- Danfoss
- Emerson
-
Sanhua
- HVAC Terminal Units
- Multifan
- Accessories
HC Wall mounted axial fans with IP55 motor
Nominal data
Description
Wall mounted axial fans with fibreglass reinforced plastic propeller.
Fan:
• Steel sheet support frame.
• Fibreglass reinforced polyamide-6 impeller.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Models 71, 80, 90 and 100: The protection grid is supplied as an accessory.
• Airflow direction from motor to impeller.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings. IP55 protection. Except single-phase models from size 45 to size 63, with IP54 protection. 1 or 2 speeds depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +60 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Motor, impeller and grille assembly (F version), except models 71, 80, 90 and 100, which are supplied without a grille.
• Motor, impeller assembly (version G).
• Airflow direction from impeller to motor.
• Special windings for different voltages.
HC-25-2T/H 360x360x280
HC-25-2M/H 360x360x280
HC-25-4T/H 360x360x280
HC-25-4M/H 360x360x280
HC-31-2T/H 440x440x300
HC-31-2M/H 440x440x300
HC-31-4T/H 440x440x300
HC-31-4M/H 440x440x300
HC-35-2T/H 500x500x320
HC-35-4T/H 500x500x320
HC-35-4M/H 500x500x320
HC-40-4T/H 570x570x360
HC-40-4M/H 570x570x360
HC-40-6T/H 570x570x360
HC-40-6M/H 570x570x360
HC-45-4T/H 640x640x370
HC-45-4M/H 640x640x370
HC-45-6T/H 640x640x370
HC-45-6M/H 640x640x370
HC-50-4T/H 830x830x490
HC-50-4M/H 830x830x490
HC-50-6T/H 830x830x490
HC-50-6M/H 830x830x490
HC-56-4T/H IE3 770x770x420
HC-56-6T/H 770x770x420
HC-56-6M/H 770x770x420
HC-63-4T/H IE3 830x830x490
HC-63-6T/H 830x830x490
HC-63-6M/H 830x830x490
HC-71-4T/H IE3 960x960x610
HC-71-6T/H IE3 960x960x610
HC-71-6M/H 960x960x610
HC-80-6T/H IE3 1110x600x1180
HC-90-4T/H IE3 1260x1260x710
HC-90-6T/H IE3 1260x1260x710
HC-100-4T/H IE3 1310x1310x710
HC-100-6T/H IE3 1310x1310x710
